Fahrphysik von Momo [1.27.x]

• _{29. Juni, 23:59 Uhr}
  Version 9.0

  Physics v9.0 by Momo - 1.44/1.45

  WHAT THIS MOD DOES

  1. Realistic brake (finally), closer to a real automobile, it will not stop your truck suddenly any more (provided that you follow the recommended setting), now it is possible to stop your truck smoothly without spilling your coffee all over the dashboard, and it will not let your truck run out of control. You still have good control over your truck as you feel when you drive a car in RL.

  2. No more crazy wobbling cab like a Loonie Tunes car. This mod makes the cab reacts more to the front and less to the side (the separate joint between the cab and the chassis). As a result, the cabin should now bounce slightly 2 – 3 times when you stop the truck, but it will no longer wobble to the side when you turn the wheel just 10 degree at low speed or when it should not wobble. It will wobble only when it is supposed to.

  3. No more cabin jerking up every time you step on the gas even a little. But it will still jerk up when it is supposed to such as a high acceleration rate.

  4. This mod also includes its own seat movement, but if you are not satisfied, it is also compatible with my Air Ride mods, provided that you place the Air Seat mods higher than this one.

  To achieve the intended result, follow the truck setting displayed above, or start with it, then adjust to your liking from there. Also the “Physics camera” setting should be enabled and set to max.

  If you are a truck driver in real life, and want to help me improve this mod to make it more true to RL trucks, please feel free to suggest in the comment section. If available, please provide a video link so that I can see your point more clearly.

  COMPATIBLE WITH

  1. ALL SCS trucks and all modded trucks (place this mod higher than modded trucks).
  2. My Air Ride mods (place this mod lower than them).
  3. All other mods that has nothing to do with truck physics and/or the seat. If you are unsure, place this mod higher than them.
  4. All future patches until SCS changes truck physics (rarely) and/or until your mod manager rejects it (red dot). No need to ask me every patch.

  Credits
  Momo

• _{21. Mai, 22:58 Uhr}
  Version 6.0.2 (21.05.18)

  Momo’s Physics v 6.0.2 (1.31.x)

  New in 6.0.2:
  – Updated compatibility with 1.31.x
  – Added compatibility for MadSter MAN TGX euro6 v1.21 (tractor)
  – Fixed 8×4 nose dipping issue (sacrificing the front suspension by half)
  WARNING: This version is for steering wheels only. Not suitable for joypad/keyboard.
  ——————————————————————————–
  WHAT IS THIS MOD ? :

  This is a realistic physics mod.
  This mod does not include seat suspension, If you want more movement, get one of my “Air Ride” mods as an add-on. Find it in my collection:
  https://ets2.lt/en/?s=momo

  MAIN FEATURE OF THIS MOD:

  Version 6.0

  – The turning circle has been increased from vanilla 8.5 meters to 11.5 meters, closer real life trucks. The result is your trucks will need more space to complete a circle.

  – Simulate steering wheel 4.9 turns lock to lock (according to real life Scania R specification) virtually, meaning you will not see your steering wheel make 4.9 turns but you will feel the compensation it makes to match 4.9 turns. The result is you your steering wheel will feel much more realistic (if you set the sensitivity/non linearity correctly).

  – Steering ratio is increased from vanilla 12:1 to 20:1 closer to real life. Meaning your steering will be a lot smoother (if you set the sensitivity/non linearity correctly)

  If you don’t understand this information, never mind, just play it, you don’t need to know. This mod is mainly for people who are looking for hardcore realism. If you don’t like this feature, you are invited to use 6.2 or 6.3.
  —————————————————————————————————-
  CHARACTERISTIC OF EACH VERSION

  1.0 – No longer available
  2.0 – No longer avaialable
  3.0 – Subtle movements
  4.0 – Moderate movements
  5.0 – Subtle movements
  6.0 (Geometry series) – Subtle movements with all the steering ratio features, for wheels only.
  6.1 (Geometry series) – Moderate movements with all the steering ratio features, for wheels only.
  6.2 (Joypad Friendly) – A clone of 6.1 but without the steering ratio features. For both joypads and wheels.
  6.3 (Active series) – Max movements with all the steering ratio features, for wheels only.
  6.3 (Joypad Friendly) – A clone of 6.3 but without the steering ratio features. For both joypads and wheels.

  Note: From 6.x versions onward, the seat suspension is not included but available separately.
  ——————————————————————————————————
  USE INSTRUCTIONS & COMPATIBILITY:

  1. Make sure you have enabled the “physics camera” in the game option menu. And its bar has been set to 100%.
  2. (Recommended) Set the “Trailer Stability” to 0%.
  3. Test and readjust your steering sensitivity/non linearity to your linking, as this mod heavily changed the steering angle and ratio. Recommended setting for 900 wheels is; 50% sensitivity, 75% non-linearity or somewhere close.
  4. This mod must be higher than any truck mods, and any mod related to the trucks.
  5. (Optional) For realistic feel of the speed, type “warp 0.8? in the console command (without the ” “) for FOV 80 degrees. The speed will be equal to real life. (re-do this everytime you start the game).

  – Compatible with game patch 1.31.x and all DLCs.
  – Compatible trucks: All SCS original, MadSter MAN TGX Euro6 v.2.1 Tractor, RJL Scania, RTA Renault T.
  – (Very rare) Some engine mods may conflict with this mod. (engine mods linked to chassis)

  DONATION (Not required, but highly appreciated)

  Any amount (even one cent) of your kindness & support will be greatly appreciated.

  https://www.paypal.me/aaticha

• _{22. Dezember, 01:58 Uhr}
  Version 6.3

  Momo’s Physics 6.3 Super Active

  ** THIS VERSION IS FOR STEERING WHEELS **
  ———————————————————————–
  This 6.3 is a super active version of 6.1.
  6.3 has everything else the same as 6.1 except 6.3 has a much more active cabin than 6.1.

  CHANGES FROM 6.1
  – Much more active cabin, but still realistic.
  – The cabin now is so active that you don’t need a seat mod to help.
  – You will feel the active cabin movement with or without a seat mod.

  CHANGES FROM THE VANILLA
  – Please refer to physics 6.1 description.
  https://ets2.lt/en/official-momos-physics-6-1-geometry/

  USE INSTRUCTIONS & RECOMMENDATION
  – You should try this 6.3 without any seat mod first to see the effect of this mod. If it’s still not enough for you, you can add a seat mod later.
  Adjust the following in your option menu:
  – Steering sensitivity 100%
  – Steering non-linearity 0 – 75% (0 being quickest/ 75 being slowest)
  – Trailer Stability 0%
  – Enable Physics Camera, and give it 100%

  COMPATIBILITY

  – Patch 1.30 compatible
  – Compatible with my Air Ride mods.
  – All SCS’s trucks compatible (including the new Scania S & R)
  – RJL Scania R compatible
  – RTA Renault Range T 6.2 compatible
  – Scania 114L by Tiana95 (4×2 only) compatible
  – More modded trucks coming in the future
  – Not compatible with other trucks (will not work correcrly)
  – Not compatible with other physics mod.

  DONATION ?

  This mod is and will always be free of charge. However, tips are always appreciated.
  You can donate by Paypal or Steam Wishlist/Trading Cards.

  https://www.paypal.me/aaticha

  Credits:
  Momo, Yuna

• _{09. Dezember, 16:22 Uhr}
  Version 6.2

  This version is the same as its previous 6.1 version, except 6.2 uses the game’s vanilla steering for joypad friendly purpose. Steering wheels can also be used with this version if you prefer the vanilla steering.
  ** IMPORTANT: You need a separate air suspension seat mod to work with this mod, choose an air seat of your chioce from the links below:
  Choice 1: Air Ride A Series 1.0
  http://uploadfiles.eu/uarodpljcp2p/air_ride_a1_0.scs.html
  Choice 2: Air Ride B Series 1.0
  http://uploadfiles.eu/2vuwxtri7s8y/airseat_b_1_0.scs.html
  —————————————————————————–
  This is an official upload of Momo’s Physics 6.1 Geometry.
  —————————————————————————–
  ABOUT THIS MOD:
  “Physics 6.2 Joypad” is a joypad friendly version of Physics 6.1. Because 6.1 is optimized for 900 degree steering wheels.
  CHANGES IN 6.1 AND 6.2 FROM 6.0
  1. Improved the cabin pitch to a more realistic level.
  2. Improved the front wheel suspension to be slightly firmer.
  3. Removed the air suspension seat to be a separate mod of your choice as mentioned above.
  4. Reduced the truck weight by 1 ton, from 8.5 to 7.5 tons correctly equal to real life trucks.
  5. Realistic cabin movement as studied from real life trucks.
  6. Realistic wheel suspensions.
  CHANGES FROM THE VANILLA GAME: (This section is applied to 6.1 only)
  1. Increased truck turning radius (circle) to match real life trucks.
  – This mod = 11.5 meters.
  – Real life Scania R = 12.5 meters
  – The vanilla = 8.5 meters
  – Please be aware that you need more space to make a circle turn.
  2. Increased steering ratio (steering degree : wheel turning degree)
  – Real life truck = 20:1 or higher
  – The vanilla = 12:1
  – This mod = somewhere close to 20:1 (classified information)
  3. Virtually increased steering wheel turning degree lock to lock:
  – Real life truck = 4.9 turns (1800 degrees)
  – The vanilla = 2.5 turns (900 degrees) same as your Logitech G25/27/29
  – This mod = virtually increased higher than 2.5
  4. The changes from 1 – 3 above result to a realistic, smooth steering as a real life car.
  USER INSTRUCTIONS
  – 100 % Steering sensitivity
  – 0% – 50% Non linearity
  – 0% Trailer Stability
  – 100% Camera physics
  – Give this mod high priority. (Lower than my Air Ride mods)
  – Your steering wheel bundle software 50% sensitivity (if you have).
  COMPATIBILITY
  – Patch 1.30 compatible
  – All SCS’s trucks compatible (including the new Scania S & R)
  – RJL Scania R compatible
  – RTA Renault Range T 6.2 compatible
  – Scania 114L by Tiana95 (4×2 only) compatible
  – More modded trucks coming in the future
  – Not compatible with other trucks (will not work correcrly)

• _{01. Dezember, 22:39 Uhr}
  Version 6.1

  ** IMPORTANT: You need a separate air suspension seat mod to work with this mod, choose an air seat of your chioce from the links below:

  Choice 1: Air Ride A Series 1.0
  http://uploadfiles.eu/uarodpljcp2p/air_ride_a1_0.scs.html

  Choice 2: Air Ride B Series 1.0
  http://uploadfiles.eu/2vuwxtri7s8y/airseat_b_1_0.scs.html
  —————————————————————————–
  This is an official upload of Momo’s Physics 6.1 Geometry.
  —————————————————————————–

  ABOUT THIS MOD:

  “Physics 6.1 Geometry” is a sequel of “Physics 6.0 Beat the Geometry”. The newer version does not replace the older one because it contains major changes which many not be preferred by some users. So i decided to keep both versions available.

  CHANGES IN 6.1 FROM 6.0

  1. Improved the cabin pitch to a more realistic level.
  2. Improved the front wheel suspension to be slightly firmer.
  3. Removed the air suspension seat to be a separate mod of your choice as mentioned above.
  4. Reduced the truck weight by 1 ton, from 8.5 to 7.5 tons correctly equal to real life trucks.

  CHANGES FROM THE VANILLA GAME:

  1. Increased truck turning radius (circle) to match real life trucks.
  – This mod = 11.5 meters.
  – Real life Scania R = 12.5 meters
  – The vanilla = 8.5 meters
  – Please be aware that you need more space to make a circle turn.

  2. Increased steering ratio (steering degree : wheel turning degree)
  – Real life truck = 20:1 or higher
  – The vanilla = 12:1
  – This mod = somewhere close to 20:1 (classified information)

  3. Virtually increased steering wheel turning degree lock to lock:
  – Real life truck = 4.9 turns (1800 degrees)
  – The vanilla = 2.5 turns (900 degrees) same as your Logitech G25/27/29
  – This mod = virtually increased higher than 2.5

  4. The changes from 1 – 3 above result to a realistic, smooth steering as a real life car.

  5. Realistic cabin movement as studied from real life trucks.

  6. Realistic wheel suspensions.

  USER INSTRUCTIONS

  In order to experience the full effect, you MUST do exactly this:

  * This mod is optimized for 900 degree wheels.
  * May not be suitable for keyboard/joypad.

  – 100 % Steering sensitivity
  – 0% – 50% Non linearity
  – 0% Trailer Stability
  – 100% Camera physics
  – Give this mod the top priority.
  – Your steering wheel bundle software 50% sensitivity.

  COMPATIBILITY

  – Patch 1.30 compatible
  – All SCS’s trucks compatible (including the new Scania S & R)
  – RJL Scania R compatible
  – RTA Renault Range T 6.2 compatible
  – Scania 114L by Tiana95 (4×2 only) compatible
  – More modded trucks coming in the future
  – Not compatible with other trucks (will not work correcrly)
  – Not compatible with other physics mod.

  DONATION ?

  This mod is and will always be free of charge. However, tips are always appreciated.
  You can donate by Paypal or Steam Wishlist/Trading Cards.

  https://www.paypal.me/aaticha

  Credits:
  Momo, Yuna

• _{18. November, 00:18 Uhr}
  Version 6.0.1

  (Momo Physics version 6.x, 5.x, 4.x, 3.x, 2.x are different series. They are not a sequel to each other. Each one has their own unique characteristic. Choose one that suits your taste.)
  ——————————————————-
  CONCEPT

  As we all know that one of ETS2 major pains for us is the steering issues as too oversteering, too sensitive that make your so called truck rock like a little boat.

  That is because the vanilla physics (and most other mods as well) have had the geometry calculation of the steering ratio, turning angle and turning radious all terribly wrong when compared to real life trucks.

  And SCS knows this well, because of the limitation of 900 degree wheels that most gamers use will never simulate a real life truck’s 1,800 degree wheels. That’s why they give you the “Non Linearity” option to compensate that. But even that, it is still not easy for you to get the correct setting of it, and often leads you to another problem.

  No matter what you have done, the steering never feels real in your hands.

  Since ETS2 is such an amazing game/simulator that i love, so i would not give up after my previous 5 different physics mods (that are ok). I secretly worked and tested Physics 6 for over a month in hope to bring the most realistic physics mod as far as possible in all aspects. So i even studied some geometry calculation of cars and trucks by myself just to make this mod. And finally i (think I) have beaten the steering issues and am confident enough to share.

  FACTS

  Do you know that :

  – Real life trucks have a turning radious (or turning circle) of 12.8 meters while vanilla ETS2 trucks have only 8.75 meters ?

  – Real life trucks’ steering wheel can turn 4.9 turns lock to lock while your conventional 900 degree wheel can turn only 2.5 turns ?

  – ETS2 vanilla trucks have a steering ratio of only 12: 1 (minimum for standard cars) while real life trucks have a lot higher ratio ?

  – Those are the causes of ETS2’s steering problem ?

  THIS MOD’S HIGHLIGHTED FEATURES

  – Turning circle 11.5 meters (real life trucks’ 12.8).

  – Realistic steering ratio close to real life cars without using “Non Lineraity” and without causing understeering.

  – Smooth and precise steering close to real life cars without sacrificing anything.

  – Realistic cabin, seat movement.

  – Realistic wheel suspensions (rear suspension is made softer to encourage cabin’s movement)

  – Realistic cabin & suspension behavior when braking (the nose heavily pushed towards the ground when you apply max brake with a heavy trailer attached).

  – Realistic leaning to left & right when you take a sharp turn.

  – This mod does not add much weight to the vanilla, it only adds a ton necessary to encourage the cabin & suspension behavior. So the weight is still close to real life trucks.

  USER INSTRUCTIONS

  In order to experience the full effect, you MUST do exactly this:

  * This setting is only for 900 degree wheel users.
  * For joypad/keyboard users, you need to try on your own.

  – 100 % Steering sensitivity
  – 0% – 35% Non linearity
  – 0% Trailer Stability
  – 100% Camera physics
  – Give this mod the top priority.
  – Your steering wheel bundle software 50% sensitivity.

  COMPATIBILITY

  – Patch 1.30 compatible and may so for some older.
  – All SCS’s trucks including the new Scania S & R
  – RJL Scania R
  – RTA Renault Range T
  – More modded trucks coming in the future

  DONATION ?

  This mod is and will always be free of charge. However, tips are always appreciated.
  You can donate by Paypal or Steam Wishlist/Trading Cards.

  https://www.paypal.me/aaticha

  SPECIAL THANKS TO GENEROUS DONATER:

  – E. Mous

  CONTACT ME

  esme.maryrose@gmail.com

  Credits:
  Momo, Yuna

• _{13. November, 20:54 Uhr}
  Version 6.0

  MOMO'S NEW PHYSICS - Beat the Geometry V6.0 1.28.X

  CONCEPT

  As we all know that one of ETS2 major pains for us is the steering issues as too oversteering, too sensitive that make your so called truck rock like a little boat.

  That is because the vanilla physics (and most other mods as well) have had the geometry calculation of the steering ratio, turning angle and turning radious all terribly wrong when compared to real life trucks.

  And SCS knows this well, because of the limitation of 900 degree wheels that most gamers use will never simulate a real life truck’s 1,800 degree wheels. That’s why they give you the “Non Linearity” option to compensate that. But even that, it is still not easy for you to get the correct setting of it, and often leads you to another problem.

  No matter what you have done, the steering never feels real in your hands.

  Since ETS2 is such an amazing game/simulator that i love, so i would not give up after my previous 5 different physics mods (that are ok). I secretly worked and tested Physics 6 for over a month in hope to bring the most realistic physics mod as far as possible in all aspects. So i even studied some geometry calculation of cars and trucks by myself just to make this mod. And finally i (think I) have beaten the steering issues and am confident enough to share.

  FACTS

  Do you know that :

  – Real life trucks have a turning radious (or turning circle) of 12.8 meters while vanilla ETS2 trucks have only 8.75 meters ?

  – Real life trucks’ steering wheel can turn 4.9 turns lock to lock while your conventional 900 degree wheel can turn only 2.5 turns ?

  – ETS2 vanilla trucks have a steering ratio of only 12: 1 (minimum for standard cars) while real life trucks have a lot higher ratio ?

  – Those are the causes of ETS2’s steering problem ?

  THIS MOD’S HIGHLIGHTED FEATURES

  – Turning circle 11.5 meters (real life trucks’ 12.8).

  – Realistic steering ratio close to real life cars without using “Non Lineraity” and without causing understeering.

  – Smooth and precise steering close to real life cars without sacrificing anything.

  – Realistic cabin, seat movement.

  – Realistic wheel suspensions (rear suspension is made softer to encourage cabin’s movement)

  – Realistic cabin & suspension behavior when braking (the nose heavily pushed towards the ground when you apply max brake with a heavy trailer attached).

  – Realistic leaning to left & right when you take a sharp turn.

  – This mod does not add much weight to the vanilla, it only adds a ton necessary to encourage the cabin & suspension behavior. So the weight is still close to real life trucks.

  USER INSTRUCTIONS

  In order to experience the full effect, you MUST do exactly this:

  * This setting is only for 900 degree wheel users.
  * For joypad/keyboard users, you need to try on your own.

  – 100 % Steering sensitivity
  – 0% Non linearity (can be increased a little if you desire, up to 25%)
  – 0% Trailer Stability
  – 100% Camera physics
  – Give this mod the top priority.
  – Your steering wheel bundle software 50% sensitivity.

  COMPATIBILITY

  – Patch 1.28 compatible and may so for some older.
  – All SCS’s trucks
  – RJL Scania R
  – RTA Renault Range T
  – More modded trucks coming in the future

  USER AGREEMENT

  By downloading this mod, you have agreed that:

  – You will not repost this mod anywhere.
  – You will not steal my mod.

  I have put a lot of work and effort to make this mod , please respect that.

  DONATION ?

  This mod is and will always be free of charge. However, tips are always appreciated.
  You can donate by Paypal or Steam Wishlist/Trading Cards.

  https://www.paypal.me/aaticha

  Credits:
  Momo, Yuna

• _{11. November, 18:11 Uhr}
  Version 5.1

  From one of the most experienced physics modders, modder of Physics 1, 2, 3, 4 and now the pride and the ultimate Physics 5, taking ETS2 to another level of realism.
  V5.1
  1. Use the steering sensitivity of ATS 1.29
  2. Use wheel visual rotation degree of ATS
  3. From 1 and 2 above, now you should feel much smoother and more realistic steering.
  4. Slightly soften the rear suspension.
  This is a completly new physics mod built from scratch, not a rework of my previous released mods. This mod contains totally new and different formula from the previous ones.
  COMPATIBILITY
  - Made from game patch 1.28 - fully compatible.
  - Fully compatible with all original SCS trucks.
  - Fully compatible with RJL Scania.
  - Fully compatible with Maz 5440 A8 (Do not use with the tent)
  - Fully compatible with Polatli's Renault Range T (Not RTA's mod, please don't confuse make sure it's Polatli's Renault)
  - NOT compatible with any other physics mod.
  - NOT compatible with any other mod that deals with truck weight, chassis, seat, suspension, steering, brake.
  - NOT compatible with any other modded trucks. (will add Big Stars, Madster, Ohana in future updates)
  --------------------------------------------------------------------
  USER INSTRUCTIONS
  - Give this mod TOP priority above all other mods.
  - Enable "Physics Camera" and slide its bar to max.
  - "Trailer Stability" set to min.
  - You may need to test to re-adjust the steering sensitivity/non linearity depending on your controller.
  - For 900 degree wheels, 0% sensitivity and 0 - 5% non-linearity.
  - For 270 degree wheels, 50% sensitivity and 100% non-linearity.
  - "Braking intensity" recommended at 15 - 30% for Logitech Steering Wheels.
  - For users who use a keyboard or joypad to steer, you may need to test and re-adjust the scale.
  OPTIONAL SET UP
  If you want to experience even smoother and less twitchy steering, do the following:
  1. Find a file named "Control.txt" in your profile folder (My document > Euro Truck > Profile). And copy it to a safe place just in case. If you don't like the change you can take the old file back.
  2. Open the file, find a line that says :
  "mix steering `dsteering - (pow(normalize(abs(sel(c_jisteer, -j_steer?0, j_steer?0)), c_steer_dz), (1.0 + c_steer_func * 0.5)) * sign(sel(c_jisteer, -j_steer?0, j_steer?0)))`"
  3. Replace that line with the following line:
  "mix steering `dsteering - (0.58 * normalize(abs(j_steer?0), c_steer_dz) + (0.42 * (c_steer_func / 2)) * pow(normalize(abs(j_steer?0), c_steer_dz), 4)) * sign(sel(c_jisteer, -j_steer?0, j_steer?0))`"
  4. Save the file. And run the game normally.
  5. Set the "non-linearity" 100% "sensitivity" 0% and adjust from there to suit you.
  6. It's done. Drive and see if you like the new steering.
  This formula makes your steering wheel act like a 1080 degree wheel (real life truck). This formula works best with 900 degree wheels like G25/G27/G29.

• _{29. September, 00:35 Uhr}
  Version 5.0.2

  From one of the most experienced physics modders, modder of Physics 1, 2, 3, 4 and now the pride and the ultimate Physics 5, taking ETS2 to another level of realism.
  5.0.2 Fixes
  - Understeering issue.
  - Max speed and acceleration issue.
  - Added compatibility for Maz 5440 A8 modded truck.
  "I have 3 words that best describe physics 5, Subtle - Soft - Heavy"
  -- Momo
  This is a completly new physics mod built from scratch, not a rework of my previous released mods. This mod contains totally new and different formula from the previous ones.
  NEW MAIN FEATURES FROM PHYSICS 5
  - Completely new formula, making the cabin feels realisticly very heavy without adding too much weight.
  - True to life air suspensions of the front wheels, cabin and seat - not too jumpy or too shaky like other mods.
  - All of the above mentioned features are studied from real life trucks.
  FEATURE FROM 4.2
  - Improved realism of the brake intensity - smooth braking.
  COMPATIBILITY
  - Made from game patch 1.28 - fully compatible.
  - Fully compatible with all original SCS trucks.
  - Fully compatible with RJL Scania.
  - Fully compatible with Maz 5440 A8 (since 28th September 2017)
  - NOT compatible with any other physics mod.
  - NOT compatible with any other mod that deals with truck weight, chassis, seat, suspension, steering, brake.
  - NOT compatible with any other modded trucks. (will add Big Stars, Madster, Ohana in future updates)
  USER INSTRUCTIONS
  - Give this mod TOP priority above all other mods.
  - Enable "Physics Camera" and slide its bar to max.
  - "Trailer Stability" set to min.
  - You may need to test to re-adjust the steering sensitivity/non linearity depending on your controller.
  - For 900 degree wheels, 0% sensitivity and 0 - 5% non-linearity.
  - For 270 degree wheels, 50% sensitivity and 100% non-linearity.
  - "Braking intensity" recommended at 15 - 30% for Logitech Steering Wheels.
  - For users who use a keyboard or joypad to steer, you may need to test and re-adjust the scale.
  OPTIONAL SET UP
  If you want to experience even smoother and less twitchy steering, do the following:
  1. Find a file named "Control.txt" in your profile folder (My document > Euro Truck > Profile). And copy it to a safe place just in case. If you don't like the change you can take the old file back.
  2. Open the file, find a line that says :
  "mix steering `dsteering - (pow(normalize(abs(sel(c_jisteer, -j_steer?0, j_steer?0)), c_steer_dz), (1.0 + c_steer_func * 0.5)) * sign(sel(c_jisteer, -j_steer?0, j_steer?0)))`"
  3. Replace that line with the following line:
  "mix steering `dsteering - (0.58 * normalize(abs(j_steer?0), c_steer_dz) + (0.42 * (c_steer_func / 2)) * pow(normalize(abs(j_steer?0), c_steer_dz), 4)) * sign(sel(c_jisteer, -j_steer?0, j_steer?0))`"
  4. Save the file. And run the game normally.
  5. Set the "non-linearity/sensitivity" to 100%.
  6. It's done. Drive and see if you like the new steering.
  This formula makes your steering wheel act like a 1080 degree wheel (real life truck). This formula works best with 900 degree wheels like G25/G27/G29.

• _{24. Juli, 20:16 Uhr}
  Version 4.2.5

  MOMO'S PHYSICS V4.2.5

  4.2.5
  Added Scania RJL compatibility. Now fully compatible with Scania RJL.
  Slightly improved seat suspension. (slightly firmer)
  "This mod is the most realistic physic mod I've ever tried. The way how the cabin moves when I'm driving over diffrent kind of roads, inside and outside and in combination with the pneumatic seat. And it works with SCS trucks as well as with modded trucks. A promo video which shows you a new mod and teaches you some usefull things about driving at the same time.
  Isn't that great? So, for all the wannabe truckers out there, watch this video.
  Maybe you can learn something" --- HurricanMC
  
  MAIN FEATURES:
  - Realistic, agressive, firm & heavy cabin behavior
  - Realistic, soft suspension
  - Realistic, soft, firm seat air suspension
  - Realistic, agressive, firm & heavy cabin roll
  - Greatly improved maneuverability of 8x4, 6x4, 6x2, 6x2/4,.
  USER INSTRUCTIONS :
  - TOP priority in the mod manager. (Required)
  - In the game option menu, enable "Physics Camera" and slide its bar to the maximum. (Required)
  - In the game option menu, set the trailer stability to zero. (Recommended)
  - Steering non linearity is recommended at 100% (up to you)
  - Steering sensitivity is recommended at 75% (up to you)
  COMPATIBILITY :
  - Game patch 1.27 fully compatible.
  - NOT compatible with any other physics mod.
  - NOT compatible with my "Driver Seat" mod. (The feature already included)
  - Partially compatible with modded trucks that change the chassis parameters.
  - All original SCS trucks fully compatible.

• _{10. Juli, 17:05 Uhr}
  Version 4.2.4

  MOMO'S PHYSICS V4.2.4

  - Improved driver seat movement.
  - Now the steering sensitivity is recommended at 75%.
  Non lineraity still remains 100%. It's totally up to you.
  - Slightly firmer cabin roll and pitch.
  "This mod is the most realistic physic mod I've ever tried. The way how the cabin moves when I'm driving over diffrent kind of roads, inside and outside and in combination with the pneumatic seat. And it works with SCS trucks as well as with modded trucks. A promo video which shows you a new mod and teaches you some usefull things about driving at the same time.
  Isn't that great? So, for all the wannabe truckers out there, watch this video.
  Maybe you can learn something" --- HurricanMC
  
  MAIN FEATURES:
  - Realistic, agressive, firm & heavy cabin behavior
  - Realistic, soft suspension
  - Realistic, soft, firm seat air suspension
  - Realistic, agressive, firm & heavy cabin roll
  - Greatly improved maneuverability of 8x4, 6x4, 6x2, 6x2/4,.
  USER INSTRUCTIONS :
  - TOP priority in the mod manager. (Required)
  - In the game option menu, enable "Physics Camera" and slide its bar to the maximum. (Required)
  - In the game option menu, set the trailer stability to zero. (Recommended)
  - Steering non linearity is recommended at 100% (up to you)
  - Steering sensitivity is recommended at 75% (up to you)
  COMPATIBILITY :
  - Game patch 1.27 fully compatible.
  - NOT compatible with any other physics mod.
  - NOT compatible with my "Driver Seat" mod. (The feature already included)
  - Partially compatible with modded trucks that change the chassis parameters.
  - All original SCS trucks fully compatible.

• _{02. Juli, 21:25 Uhr}
  Version 4.2.2

  V.4.2.2
  - Adjusted the tyres for better maneuverability.
  - Reduced the driver head moving forward.
  - Slightly adjusted the seat suspension.
  " This mod is the most realistic physic mod I've ever tried. The way how the cabin moves when I'm driving over diffrent kind of roads, inside and outside and in combination with the pneumatic seat. And it works with SCS trucks as well as with modded trucks.
  A promo video which shows you a new mod and teaches you some usefull things about driving at the same time. Isn't that great? So, for all the wannabe truckers out there, watch this video. Maybe you can learn something"
  MAIN FEATURES
  - Realistic, agressive, firm & heavy cabin behavior
  - Realistic, soft suspension
  - Realistic, soft, firm seat air suspension
  - Realistic, agressive, firm & heavy cabin roll
  - Greatly improved maneuverability of 8x4, 6x4, 6x2, 6x2/4,. A lot smoother steering.
  USER INSTRUCTIONS:
  - TOP priority in the mod manager. (Required)
  - In the game option menu, enable "Physics Camera" and slide its bar to the maximum. (Required)
  - In the game option menu, set the trailer stability to zero. (Recommended)
  - Steering non linearity is recommended at 100%
  - Steering sensitivity is recommended at 100%

• _{27. Juni, 12:04 Uhr}
  Version 4.2

  MAIN FEATURES (in version 4.2):
  - Realistic, agressive, firm & heavy cabin behavior
  - Realistic, soft suspension
  - Realistic, soft, firm seat air suspension
  - Realistic, agressive, firm & heavy cabin roll
  USER INSTRUCTIONS:
  - TOP priority in the mod manager. (Required)
  - In the game option menu, enable "Physics Camera" and slide its bar to the maximum. (Required)
  - In the game option menu, set the trailer stability to zero. (Recommended)
  - Steering non linearity is recommended at 100%
  - Steering sensitivity is recommended at 100%

• _{18. Juni, 00:38 Uhr}
  Version 4.0

Dateien